Electric bell
KWD 3.000
SKU: 0914-0118
Category: Instruments
Details
- Plastic bell is design for wide range experiments such as sturdy pressed plastic box.
- Dome gong diameter 75mm approx.
- Built with a twin coil
- Operates on both battery or low voltage transformer supply (6-12V AC/DC)
- It comes with a detachable, snap-on plastic cover to show inner assembly.
Description
Instrument Name: Electric bell
Reviews (0)
Be the first to review “Electric bell” Cancel reply
Related products
-
Instruments
Bell Demonstration Model
KWD 12.000Bell Demonstration Model
KWD 12.000
SKU: 0914-0120 Category: InstrumentsDescription:
- The demonstration model is mounted on a large panel to show the connections on a vertical stand.
- All of the wiring is visible and components are of large size.
- Operates on 3-6 volts AC.
Reviews
There are no reviews yet.
Be the first to review “Bell Demonstration Model” Cancel reply -
Instruments
Compass Large 15cm
KWD 27.950Compass Large 15cm
KWD 27.950
SKU: 0914-0212 Category: InstrumentsDescription:
- The compass is designed with dial marked with principal points of the compass
- The case is made from plastic/aluminium with a top glass face
- Large diameter of 150mm
- High accuracy instrument used for orientation and direction.
Reviews
There are no reviews yet.
Be the first to review “Compass Large 15cm” Cancel reply -
Instruments
Barometer Tube 900mm
KWD 7.500Barometer Tube 900mm
KWD 7.500
SKU: 0914-0122 Category: InstrumentsDescription:Â
- Made from high quality clear glass
- The tube is straight with one open end and one rounded closed end.
- Outer diameter of 7mm (0.28″).
- Inner diameter of 4mm (0.16″).
- Used to measure air pressure in any environment. Liquid will move up the barometer tube as air pressure increases
Reviews
There are no reviews yet.
Be the first to review “Barometer Tube 900mm” Cancel reply -
Instruments
Anemometer Cup Counter Instrument
KWD 92.750Anemometer Cup Counter Instrument
KWD 92.750
SKU: 0914-0003 Category: InstrumentsDescription:
- Instrument Type: Corrosive Resistant Material
- Anemometer Cup instrument is specifically used to study the wind speed.
- The cup counters are designed in horizontal arms position.
- Cup Counter is used to count the total run of wind past, observation point through mechanical counter.
- The observation window of a mechanical counter is inclined to allow easy reading below.
- By observing the starting and ending counter readings of any period we can easily calculate the average wind speed of that interval.
Reviews
There are no reviews yet.
Be the first to review “Anemometer Cup Counter Instrument” Cancel reply
Reviews
There are no reviews yet.